Do you want to cut the cost of regular Pool Cleaning Adelaide? It’s easy! All you need to do is just maintain the water balance.

And how do you do it?

This is what we will explain in detail to you.

So read ahead!

Proper Water Balance

Pool water is delicate, and to reach the right pool concord, you need to balance it. Your pool water must not be too soft or hard. The water has to be just right.

To balance your pool water, keep the pH between 7.4 to 7.6.

You can use the following kinds of ingredients to balance your pool water:

• Calcium hardness levels
• Alkalinity levels
• pH levels

Calcium Hardness Level

Ranges from 175 ppm-300 ppm

Without calcium, the water might seek calcium from the plaster of the pool or anywhere else it can get. This is the reason why you get calcification on the walls or floor of the pool.

By adding calcium hardness, you can protect the pool walls and other equipment for the long run.

Alkalinity Levels

Ranges from 100 ppm-150 ppm

Alkalinity helps keep the pH of water from moving up and down the pH scale by engrossing key water changes.

It’s also a great idea to supply alkalinity regularly as it can fluctuate quite easily.

pH Levels

Ranges from 7.4-7.6

pH is unstable. Anything that enters the pool, be it a swimmer, rainwater, etc., affects the pH level. When the pH is high, water is basic, and if the pH is low, the water is acidic.

The perfect example of pH-neutral is our tears. As pH level changes frequently, you need to keep a great supply of Alkalinity as it will increase the pH level of the pool water.

How To Balance Your Water?

Check your pool water for pH and alkalinity level once a week with the help of a home test kit, test strips, or simply hire the Pool Service Adelaide.

For keeping your pool water balanced, you need:

• pH Increaser
• pH Reducer (hydrochloric acid)
• Alkalinity Increaser

Now you must be thinking that no alkalinity decreaser is mentioned in the list.

The reasons are:

• pH decreaser will lower the pH and alkalinity if both of them are high.
• Alkalinity increaser will increase pH & alkalinity if both are low. If the pH isn’t near 7.4, you need to add some pH increaser.
• You can add a pH decrease if the alkalinity is high as the pH will become high as well.

If the pool water is well-balanced, it will make the sanitizers work properly, such as chlorine.

Sanitization

To sanitize your pool, all you need is the right ingredient.

You don’t need to buy any fancy sanitizer. Just add the following:

• Salt
• Minerals
• Stabilized Chlorine

So add these ingredients once a week and keep all the bacteria and germs at bay.

Keep all the problems away with the perfect pool water balance.

For more guidance, consult your professionals of Pool Repairs Adelaide.

Related: 8 Reasons Why You Would Not Regret Hiring Pool Cleaners?